DVI stands for Digital Video Interface is a video connector
specially designed for the Digital Display Working Group (DDWG). They are intended to give the best image quality of display devices like LCD screens and digital projectors for our customers. DVI uses the data in a form that is based on Panel Serial using the form of reduced use of transition signaling (TMDS).
Four twisted pairs of wires to one DVI, each color code
red, green and blue, and one of them is a clock signal to transmit 24 bits per pixel. This clock is almost similar to the analog video signal. The image is sent electronically by a series of blanking interval separating each line and frame, and packetization. No DVI compression and the necessity to communicate has become part of the picture, then the only option is to turn the entire frame again. DVI is one of the highest possible resolution of 2.6 megapixels to 60 Hz. Thus, the Community has made it possible to connect a second link to the requirements of the resolution is 2.6 megapixels.
The data cutoff point for each link is limited to 165 MHz. Each display mode, you can link to, if they require more than those in excess of the limit, with the opening two-mode link. DVI is the only standard that uses both digital and analog transmission options of the same connector. DVI stands for Digital Video Interface, which is a special video connector designed by the Digital Display Working Group (DDWG). They are intended to give the best image quality of display devices like LCD screens and digital projectors for our customers.
